So since going to fusion I have been getting random power outages and don't know why. I was sitting there looking at the tank today all of a sudden the return pump shut off lights still on skimmer stayed on but shod have shut off and then the email from fusion saying a power outage. Any ideas this thing has been rock solid till I added fusion a few months ago. You can see my programming on reeftronics under allred.
Thanks
Sent from my SM-N900P using Tapatalk
Update your bootloader from the display. That fixed it for me.
You might be an engineer if...You have no life, and you can PROVE it mathematically.
Ok ill give that a try
Sent from my SM-N900P using Tapatalk
Ok so I gave this a try and worked till today and then another power failure. Is there a log to show whats tripping it?
Sent from my SM-N900P using Tapatalk
Is the power restored within a couple minutes of the power outage? If so, its probably the firmware doing it. Try updating the firmware and then update the bootloader from the display.
You might be an engineer if...You have no life, and you can PROVE it mathematically.
Tried that didnt make a difference
Subject:Apex Fusion Power Issue: apex
Failed: 2014-05-01 20:52:22 (2014-05-02 03:52:22 UTC)
Restored: 2014-05-01 20:53:07 (2014-05-0
Sent from my SM-N900P using Tapatalk
Thats definately a reboot and not a power outage. The bootloader update has always fixed it for me in the past. Possibly an aquabus cable going bad or starting to corrode. You could try cleaning your usb ports and cables, but it sounds like it might be time to contact support if it happens again after cleaning.
You might be an engineer if...You have no life, and you can PROVE it mathematically.
Yeah I doubt its got any type corrosion the system is pretty new
Sent from my SM-N900P using Tapatalk
Posting Permissions
Reply With Quote
Bookmarks