Can some help me with a temporary profile. For ex: change light setting when
visitors arrive for approx 2 hours? details would be nice.
Can some help me with a temporary profile. For ex: change light setting when
visitors arrive for approx 2 hours? details would be nice.
Set a profile to your liking , add a statement in your radions outlets on the last line ( you can use a feed mode for this ) :
If FeedA 000 Then ( profile name )
Alain
OP, in additional to Alain's great suggestion, you'll want to also go to the native/classic dashboard and change the duration of the FeedA (or whatever Feed cycle you use) to 120 minutes. From the native dashboard, that is located at Configuration / Misc Setup, and from there you'll see the durations for each of the 4 feed cycles you need to update. Once you make the change, be sure to click the "Update Settings" button at the bottom of the page for it to take effect.
Bert
How do I set a profile? Example please.
From the native dashboard go to profile , select one , select radion and program the intensity and the channel level to your liking , select update . Use this profile for your radions programming . From Fusion , go the the profile page and follow the same process not forgetting to upload the profile to the controller . Again use this profile for your radions programming .
Alain
Thanks for your help.
Yes it is the same general line of thoughts :
Add to your radions programming using advance mode and after the tdata :
If Outlet ( VO ) = ON Then ( profile )
Alain
Bookmarks