-
Pump swap issue
I swapped out my SICCE 9 return pump for a Vectra L1 on my Apex 2016. When I try to turn it on, it won’t power it. The power light on the block doesn’t turn green. I remove the plug and put in on a different wall receptacle and it powers right up. That’s how I’m currently running it.
I can hear the apex outlet power on and off when I switch it from the app. Is there some sort of reset that needs to be done for installing a different pump?
TIA
-
Nope. Just set to to
Fallback ON
Set ON
And it should work. If not, double check that you are selecting the right outlet and if you did and it doesn't work, contact support as it might be a hardware issue.
You might be an engineer if...You have no life and can prove it mathematically.
-
Ok, I set the fallback to on, where is the “set” setting?
https://uploads.tapatalk-cdn.com/201...6970b9f182.jpg
-
I gave you the advanced code.
You might be an engineer if...You have no life and can prove it mathematically.
-
Ok. I checked on the advanced tab and that’s what I had already, followed by the feed line.
-
And after all that, it turns out I had it in the wrong hole, I mean outlet. [emoji848]