Initial flow set up for COR-20
Hello everyone,
I need a step by step info on setting up my COR-20 flow. My new system is as follows.
120 gal. Reef Savvy tank with a 21" Ghost overflow which has 3 one inch drains and 2 bulkheads 1.5"
instead of two 3/4" returns Felix suggested one return line of 1", and that is what I went with.
Custom sump 46 gal. from Geo's Reef with built in manifold's for media reactor and refugium.
The overflow is set up as a bean animal 1" lines. open channel with air vent controlled with a ball valve
a siphon channel controlled with a gate valve, and a emergency drain controlled with a ball valve.
My question is do I fully open all the valves to start with, turn the COR on to 100% and then dial down the valves? Which channels do I adjust first? the open channel with the air vent controlled by the ball valve or the siphon channel controlled by a gate valve?
I think I need a step by step procedure on this.
Thanks for any support:hmm:
