Feed mode countdown clock in Fusion

Using new apex controller
I set FeedD time at 060. When D is activated the timer starts counting down from 4:59 rather than 59:59?
This worked properly with my old classic.

FEEDER

OSC 000:00/000:30/000:30 Then ON
If Time 00:00 to 15:00 Then OFF
If Time 15:02 to 00:00 Then OFF
If FeedA 000 Then ON
If FeedD 060 Then OFF

Cor 20

If FeedA 000 Then 3
If FeedD 060 Then OFF
If LEAK CLOSED Then OFF
If SOCK CLOSED Then OFF

Do I need FeedD 060 in both outlets?
Note: There is no feeder physicals plugged in.
I dropped it and it quit. I don’t think it’s relevant here.

The feed timer length is set in the misc page of either the display or the classics dashboard. The number after the feed in the code is how long to stay true after the feed timer ends and is used for delaying specific items that need to be on or off longer than everything else.

Sent from my SM-G965U using Tapatalk

You can set the Feed Interval times (bade duration) on the Miscellaneous configuration page in either Apex Local or Apex Fusion.

Thanks for the reply guys. I’ll try from my display box tonight.
Using fusion for feed intervals is no problem. The issue is timer displaying correct time left.
It works as far as actual time to come back on. 60 mins. Just as Programmed. But it only displays 4.59 and ticks down to zero. Then blank. Only displaying default feed time of 5 mins. down to zero.

Quote:

---

Originally Posted by mkeller088

Thanks for the reply guys. I’ll try from my display box tonight.
Using fusion for feed intervals is no problem. The issue is timer displaying correct time left.
It works as far as actual time to come back on. 60 mins. Just as Programmed. But it only displays 4.59 and ticks down to zero. Then blank. Only displaying default feed time of 5 mins. down to zero.

---

You did not set your feed mode to 60 minutes. You set it to be on 60 minutes after the feed mode ends, which is by default 5 minutes, so you actually have it set to be off for 65 minutes.

Sent from my SM-G965U using Tapatalk

Can you show me how that looks? I’m not very clear on where I made my error.

Quote:

---

Originally Posted by mkeller088

Can you show me how that looks? I’m not very clear on where I made my error.

---

This needs to be set to 3600 seconds. The feed line in your code should have 000 not 060. https://uploads.tapatalk-cdn.com/201...67aaad5a20.jpg

Sent from my SM-G965U using Tapatalk

I can’t thank you enough zombie and Russ. Sometimes you guys make me feel like an idiot. I’ve been running apex for over a year and I’ve never seen that miscellaneous set up for the feeder. If I go to miscellaneous config on my display the only option is power monitor enabled or disabled. Anyway you’re the best thanks again. I try to exhaust all my reading and tinkering before I go to you guys. I know you get blasted with tons of Mandane stuff.