You should watch this and enable this feature ASAP!
https://youtu.be/nbEks7DhXqY
Printable View
You should watch this and enable this feature ASAP!
https://youtu.be/nbEks7DhXqY
Mine does now! Thanks for the video, very helpful for a newb like me
I'm also on board. Thank you
Sent from my iPhone using Tapatalk
Boo-Yahhh....
What is supposed to happen when there is no connection? My modem has been offline for a day due to changing providers. I thought I would get some kind of alert, via email or text or something, but nothing so far. If I try fusion, it says it's disconnected. Hmmm. Heartbeat was verified enabled a few days ago.
Sent from my SM-N915T using Tapatalk
Check your notification settings.
Sent from my iPhone using Tapatalk
Internet outage at my house today and this worked perfectly! Got a notification, called the wife and confirmed, power was on so everything worked as it should, just no fusion. Rebooted system when I got home and back to normal!
I have to say - Great Feature! I tripped my GFCI to test it out and it worked. I still have not isolated what is causing the trip, so I nervously check Fusion while at work. Now I can rest a little easy as I will get notification. Until I get a backup battery for the unit, this is a great backup...and even then, this will work in the case of a network outage like Muttley said.
I have a question - if you have your apex head unit plugged into a UPS via the 12v port - does the heartbeat still notify you of power outages, if say my eb832 loses power, but the head unit is still getting power from the 12v?
Add to your EmailAlmQuote:
Originally Posted by Xero
If Power EBName Off 000 Then ON
I do that for each EB I have
https://uploads.tapatalk-cdn.com/201...dc16fbed5f.jpg
Seems as though I have had 7 False Heartbeat Alarms in the past 12 hours. Apex is running fine and my home's network connection is running fine. Looks like I will be turning this feature off as fast as I embraced it.
I doubt they are false alarms. Far more likely is that your Apex is not communicating with Fusion consistently. Click on the Home menu in Fusion then choose Diagnostics to see the recent connection history.Quote:
Originally Posted by clsanchez77
Your correct, "false" is not the correct word. However my home network is working perfectly fine. In fact I am showing as disconnected now while I am using the same network to make this post. I did run the diagnosis and it only confirms the disconnects. The helpful tips are mostly not applicable. Again, this is why I don't like to use online interfaces over local control when local control is an option.Quote:
Originally Posted by RussM
Having said that I will give my network a reboot, since rebooting the Apex did not make a difference.
And for what its worth, my Classic interface is working and reports "ApexFusion OK"
So I was traveling last week. Wife called and told me we had a power outage. My UPS on my cable modem had been removed as it was bad. Sure enough a few minutes later I got the heartbeat Alert..... Way To Go Neptune Systems...
A car had hit a pole and knocked out power for 55 minutes. Thanks to my APC 3000 UPS, my system did not hiccup...
I have since replaced that UPS.
Wish I saw this yesterday.
Breaker popped and I lost 4 fish including a 14" Vlamingi Tang I've had for 8 years.