Thanks! I will enter this and give it a try now!
Thanks! I will enter this and give it a try now!
Mine doesn't work on first attempt but does on second
I know this thread is a bid old, but what would be the next step in programming to trigger the storm via a physical button? So far I've setup the storm sequence which runs great when the VO is on. Now I want to turn on by a push button for 10 minutes then turn off. I've already added a button to my breakout box and programmed it to trigger the storm, but it only last while I'm holding the button, rather than running 10 minutes automatically. I'm still a little unclear on how the Min Time works and where to put it. Here's the current program:
VO_A1: Storm
Set OFF
IF SW2 Closed Then ON
Min Time 010 Then OFF
Radions Program
If Outlet Storm = ON Then Stormy
Vortechs Program
If Outlet Storm = ON Then StormWavM
Profile: Stormy
Lit Max Int: 18
Cloudy Light Int: 4
Cloudy Duration: 10
Cloudy Time: 64
Lightning Prob: 100
Lightning Int: 100
Profile: StormWavM
Pulse: (still working on a good setting)
mcanimnal: a quick edit to your programming should resolve your problem:
VO_A1: Storm
Set OFF
IF SW2 Closed Then ON
Min Time 010 Then ON
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Thank you, it is working perfectly now.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
In the folder are those assigned to all my equipment i currently have?
They aren't assigned to anything until you call them out in your code.
Thank you both, Ill give it a shot.
I would also suggest doing at least a quick skim of any sections in the CRM relating to profiles, radions, WXM, etc. It will help get your bearings straight.
http://www.neptunesystems.com/downlo...nce_Manual.pdf
Thank you I will.
Sorry but after the profile is created whats the next step to ad it to my dashboard?
The profile doesn't get added to the dashboard, you call it out in your code. A virtual outlet will need to be created to trigger the profile.
https://forum.neptunesystems.com/sho...irtual-Outlets
Once you have the profile and the VO set up and named, follow the instructions Alain gave in post 2.
Ok I got it. Thank you.
quick question
its working for me but everytime i type it in and after i turn it off my whole day cycle for lights gets messed up
my outlet on the dash is called stormy and storm is profile that i created i spot 2
i also have lights_day seet up as vo with another profile
Fallback OFF
tdata 07:00:00,0,0,0,75,75,100,100,100,75,0,0,0,0
tdata 08:00:00,0,0,50,75,75,100,100,100,75,0,0,0,0
tdata 18:00:00,0,3,50,100,100,75,75,75,100,0,0,0,0
tdata 21:00:00,0,0,0,0,0,0,0,0,0,0,0,0,0
If Outlet Stormy = ON Then storm
If Output lights_day = ON Then yellow
any advice
Bookmarks