Originally Posted by
mmn
You are using an Australian internet (WAN) address - 58.164.161.60. It will not work if you are behind a router. If you are and you don't know your router's internal (LAN) ip address or how to get it, you can turn on DHCP in your APEX via the Aquacontroller. Reboot and the APEX will try to get an ip address from your router. Then you can look at the network settings via the Aquacontroller and see what the ip address and gateway address is for your APEX. The gateway ip is likely your router's internal ip.
Once you know the internal ip of your APEX, you can use your browser with that ip and whatever port number you have set up to access your APEX from any computer on your LAN using that ip address and port number.
Once you get that working, the stuff to make Fusion work will be straightforward.
Regards
Michael
Bookmarks