Results 1 to 16 of 16

Thread: WXM module question

  1. #1
    Frequent Visitor
    Join Date
    Jul 2015
    Location
    Los Angeles
    Posts
    51

    WXM module question

    So i just hooked my 3 radions up through wxm and I'm very excited!! My eb8 is running out of room so i connected the radians to a separate power bar the plugged that into the 8th spot on my eb8. When I go to my dashboard it detects all three radions but above each one it says missing. I configured the light cycles I want but I'm unsure why its saying missing. Any ideas?

  2. #2
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,463
    Is that outlet #8 on? The lights will show as Missing when powered off. There's minimal benefit to controlling AC power to the Radions. Just plug them into regular unswitched outlet(s).
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  3. #3
    Frequent Visitor
    Join Date
    Jul 2015
    Location
    Los Angeles
    Posts
    51
    Quote Originally Posted by RussM View Post
    Is that outlet #8 on? The lights will show as Missing when powered off. There's minimal benefit to controlling AC power to the Radions. Just plug them into regular unswitched outlet(s).
    Well lol I figured out about an hour ago that they don't have to be plugged in to the eb8. But now it's weird they radions are at 4 percent but ibdontvcare them programmed to turn on for another 3 hours. Any ideas?

  4. #4
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    Post your radions outlets programming .
    Alain

  5. #5
    Frequent Visitor
    Join Date
    Jul 2015
    Location
    Los Angeles
    Posts
    51
    Screen Shot 2015-07-02 at 2.57.40 PM.pngScreen Shot 2015-07-02 at 2.57.27 PM.jpgsee anything I might be missing? Im from Calgary by the way!
    Quote Originally Posted by Alain B View Post
    Post your radions outlets programming .

  6. #6
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    I suspect your controller clock ? Maybe it's time to set the watche ?
    Alain

  7. #7
    Frequent Visitor
    Join Date
    Jul 2015
    Location
    Los Angeles
    Posts
    51
    Quote Originally Posted by Alain B View Post
    I suspect your controller clock ? Maybe it's time to set the watche ?
    Well the display screen and fusion both say the correct time. Am I missing another clock?

  8. #8
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    Quote Originally Posted by LAreefguy View Post
    Screen Shot 2015-07-02 at 2.57.40 PM.pngScreen Shot 2015-07-02 at 2.57.27 PM.jpgsee anything I might be missing? Im from Calgary by the way!

    Have you upload the programming to the radions outlets ?
    Alain

  9. #9
    Frequent Visitor
    Join Date
    Jul 2015
    Location
    Los Angeles
    Posts
    51
    Quote Originally Posted by Alain B View Post
    Have you upload the programming to the radions outlets ?
    you know what I don't think I have, how do I do that?

  10. #10
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    At the top right of the screen on the graphic scheduler page : you will see a small cloud icon with an arrow , use this to upload the programming to the first outlet . Go to the second outlet and using those icons on the top right , copy and paste the graph from the first to the second one and upload it .
    Last edited by Alain B; 07-02-2015 at 16:23. Reason: Correction
    Alain

  11. #11
    Frequent Visitor
    Join Date
    Jul 2015
    Location
    Los Angeles
    Posts
    51
    Quote Originally Posted by Alain B View Post
    At the top right of the screen on the graph page : you will see a small cloud outlet with an arrow , use this to upload the programming to the first outlet . Go to the second outlet and using those icon on the top right , copy and paste the graph from the first to the second one and upload it .
    hmmmmmm when I'm on the graph page I don't see any small cloud outlets.

  12. #12
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,463

    WXM module question

    Quote Originally Posted by LAreefguy View Post
    hmmmmmm when I'm on the graph page I don't see any small cloud outlets.
    He meant icon or button, not outlet.
    It's on the graphic scheduler page, not the probe graphs page. It's in the upper right of the first screenshot you posted. Cloud icon with up arrow in it.
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  13. #13
    Frequent Visitor
    Join Date
    Jul 2015
    Location
    Los Angeles
    Posts
    51
    Oh yea yea I did that. The problem is that my radions were on at 4 percent since I powered them up. Now that it's hit 4:45 my time it has gone into the light cycle I set out. But still I worry it will revert to 4 percent when cycle is done. I just don't get the 4 percent thing!!

  14. #14
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    Quote Originally Posted by RussM View Post
    He meant icon or button, not outlet.
    It's on the graphic scheduler page, not the probe graphs page. It's in the upper right of the first screenshot you posted. Cloud icon with up arrow in it.
    True , lol ! This is what happen when you drive and follow the Neptune forum ! OP , check your graph carefully and you will see that from lights out at 22:00 it is set at 0 % intensity to lights on at 16:43 , 5 % . So the fixtures will go dark at 22:00 ramping up to 5 % at 16:43 . So at the time you took the screen shot , 4 % is about right .
    Alain

  15. #15
    Frequent Visitor
    Join Date
    Jul 2015
    Location
    Los Angeles
    Posts
    51
    Quote Originally Posted by Alain B View Post
    True , lol ! This is what happen when you drive and follow the Neptune forum ! OP , check your graph carefully and you will see that from lights out at 22:00 it is set at 0 % intensity to lights on at 16:43 , 5 % . So the fixtures will go dark at 22:00 ramping up to 5 % at 16:43 . So at the time you took the screen shot , 4 % is about right .
    Wow you solved it!!! Thank you so much!! So to avoid this I should lower the start time to 0 percent?

  16. #16
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    Set both light out and light on at 0 % , and they will be completely dark during this time period .
    Alain

Similar Threads

  1. Question: WXM Module
    By drenai in forum Pre-Sales Questions
    Replies: 2
    Last Post: 01-14-2018, 21:31
  2. Help! WXM module is not showing up in my module list
    By Jimsreef1209 in forum AquaBus Modules, Probes, and Breakout Boxes
    Replies: 7
    Last Post: 12-11-2016, 16:55
  3. Question: WXM module
    By adicus in forum A2 Apex/ApexEL and A3 Apex Pro/Apex/Apex Jr
    Replies: 2
    Last Post: 07-09-2016, 13:38
  4. Wxm module
    By Pja31 in forum AquaBus Modules, Probes, and Breakout Boxes
    Replies: 0
    Last Post: 04-26-2015, 13:09
  5. Question: LSM module and WXM module
    By sailfin777 in forum AquaBus Modules, Probes, and Breakout Boxes
    Replies: 2
    Last Post: 09-18-2014, 12:43

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •