i need to use the OSC command to go from 20 intensity to 35 or 40 at night over a period of every 30 minutes. I know it won't let me enter 1800 on time and 1800 off time. I also know it won't let me enter if time statements every half hour for 10 hours as well so I need to use the OSC command. Unless there is a different way to accomplish this.
Ok, not being mean but have u looked at the example, it does EXACTLY WHAT u want. Please try before u keep questioning it. The main guy from gyre is telling u as am I, works PERFECT.
Night Profile
Create a new profile and call it “Night”
Select “Pump” as Control Type
Leave “Synchronize” and “Divide by 10” unchecked
Set “Initial Off Time” to 0
Set “On Time” to 60 seconds
Set “Off Time” to 60 seconds
Set “Minimum Intensity” to 20
Set “Maximum Intensity” to 30
Click Update to save
It will do this as long as u have "night" running.
Sent from my SM-G935T using Tapatalk
I don't want it to pulse I want it to slowly ramp up and down at a certain rate during the day and up and down at a certain rate at night. I don't want it to jump from 20 to 60 every 2 minutes for 12 hours. What that blog shows won't work.
, change the duration.
Sorry, once again not being mean but it's very simple. Change from 60 seconds to 5 hours or whatever u want.
A pulse is a term , doesn't mean it actually pulses. Most people want it over shorter time to simulate ocean. Dragging it out over hours to go from 20 to 40 will basically blow everything in one direction. Not like the ocean at all.
Sent from my SM-G935T using Tapatalk
I have one Gyre with icecap module. Currently i am running it in one direction ramping from 20 to 50% over a 2 minute period all day and night. How would i add a different ramp during the night? say starting at 8pm it ramps from 20 to 35% over the course of 10 minutes??
My current set up
[Gyre] "speed" outlet
Set Gyre_Up
If Outlet Gyre_OSC = ON then Gyre_Down
[Gyre_OSC] virtual outlet
OSC 000:00/002:00/002:00 Then ON
[Gyre_Up] profile
Ramp
Ramp Time 2
Start 20
End 50
[Gyre_Down] profile
Ramp
Ramp Time 2
Start 50
End 20
this set up works perfectly during the day unlike how the blog shows it. But the way this is configured I can't figure out the night time OSC because of my SET command is Gyre_Up and that won't apply correctly during the night.
Ramp up and down= pulsing, just what u want
Sent from my SM-G935T using Tapatalk
Night Profile
Create a new profile and call it “Night”
Select “Pump” as Control Type
Leave “Synchronize” and “Divide by 10” unchecked
Set “Initial Off Time” to 0
Set “On Time” to 600 seconds
Set “Off Time” to 600 seconds
Set “Minimum Intensity” to 20
Set “Maximum Intensity” to 35
Click Update to save
Sent from my SM-G935T using Tapatalk
Again. I don't want a pulse. With it set at 2 minutes minimum of 20 and max of 60. It runs at 60 for 2 minutes then switches immediately to 20 for 2 minutes. Not what I am after. Like I posted earlier. The way I have it set runs exactly how I want it, but I can only have it at one OSC all day long. Trying to figure out the 2 different ones. The OSC command as I have it set ramps up and down if you read my programming you'll see. I'm stymied as to how to add additional coding to achieve the same thing at night but with different intensities and times than daytime.
If Time 09:00 to 18:00 Then Pulse
If Time 19:00 to 08:00 Then Night
If FeedA 000 Then OFF
Sent from my SM-G935T using Tapatalk
Start from scratch and follow the example , nothing else I can say. If u have "pulse", it's just a name, and yiur duration is 60 seconds, and goes from 20 to 50 intensity , it will go from 20 to 50 over 60 seconds. GET RID OF OSC, u don't understand them and it doesn't work for what u want.
Sent from my SM-G935T using Tapatalk
Pulse is not ramping from 20 to 60 and back down to 20. Like I said it is immediate. I don't care if it's 60 seconds or a million. Go change your pulse to 120 seconds and watch what it does. It doesn't ramp from 20 to 60 it jumps from 20 to 60 at the end of the specified time. I clearly understand what I want and had it set up working exactly as that...an oscillating ramp every 2 minutes from 20 to 60 and every 2 minutes from 60 back down to 20. Pulse will not achieve this.
yup. This is directly from the blog you reference - "
- 9 am to 6 pm: Pulse for 20/10 seconds at 80/30 speed" correct? This is the pulse (in name only) that you claim will ramp from 80 to 30 over a 20 second period and ramp from 30 to 80 over a 10 second period ? That is the 9:00 to 18:00 then Pulse...correct ???
Okay....here we go...
Gyre Speed outlet:
If Time 08:00 to 09:00 Then Gyre_UpD
If Time 09:00 to 19:00 Then Gyre_PulseD
If Time 19:00 to 20:00 Then Gyre_Down
If Time 20:00 to 04:00 Then Gyre_PulseN
If Time 04:00 to 05:00 Then Gyre_PreNt
If Time 05:00 to 08:00 Then Gyre_night
Gyre_UpD :
type: ramp
ramp time :60
start intensity : 20
end intensity : 60
Gyre_PulseD
Type : pump
initial off time :0
on time :120
off time :120
minimum intensity :20
maximum intensity :60
Gyre_Down
Type : ramp
ramp time : 60
start intensity :60
end intensity :20
Gyre_PulseN
type : pump
initial off time :0
on time :15(I can't put in 15 minutes it
off time :15. Maxes out at 255)
minimum intensity :20
maximum intensity :35
Gyre_PreNt
Type: ramp
ramp time :60
start intensity :35
end intensity :20
Gyre_night
type: pump
initial off time :0
on time :60
off time :60
minimum intensity :20
maximum intensity :20
By the way I've been using and programming an apex controller for almost 7 years. I'm fairly well versed on how things work...
.....
What cable are u using, which vsp ports
Sent from my SM-G935T using Tapatalk
Bookmarks