i need apex set up for dummies

[wildwilly1]

got everything set up on tank .fusion connected working. few questions. what does the SWX3_1 SWX3_2 AND SO FORTH MEAN IN FUSION DASHBOARD. also what does TMPX3 mean. where can I go to find out all this stuff and how to set it all up confused terribbly

[mmn]

Apex Comprehensive Reference Manual
https://apexfusion.com/pdf/acrm.pdf

[wildwilly1]

I don't see anything in there about the fusion dashboard and what everything means

[Alain B]

Every things you might need to know is here : http://www.neptunesystems.com/support/docs/

[RussM]

Those are the 6 switch inputs and the temperature probe port on a Probe Module (PM1 or PM2) connected to your Apex.

[schwenkj]

So I have a similar question about the TMPx3. What is the difference between the TMP and TMPx3? the TMP is easy enough, it is at 78 which I assume is 78 degrees F and it is corroborated by a thermometer. But my TMPx3 reads 27.3. What is that? Do I need to monitor it on my Fusion Dashboard?

[zombie]

So I have a similar question about the TMPx3. What is the difference between the TMP and TMPx3? the TMP is easy enough, it is at 78 which I assume is 78 degrees F and it is corroborated by a thermometer. But my TMPx3 reads 27.3. What is that? Do I need to monitor it on my Fusion Dashboard?

TMPx3 is the temp probe for your PM1 or PM2 module that is at aquabus address 3. If you dont have a probe connected to it, disable TMPx3. Readings near 20-30 degrees mean there isnt a probe connected or the probe has open circuited.

Sent from my SM-G965U using Tapatalk