Tonight I hooked up my dual Icecap controller modules and set up a program almost entirely based on the video Carlos posted on youtube. The problem is that it is only running 50% correctly, and I can't figure out what's wrong. I have XF130s mounted horizontally on left and right sides of the tank.
Symptoms: Gyre_L ramps up Gyre_Day_Up over one minute as it should. Gyre_R ramps down Gyre_Day_Dn as it should at the same time Gyre_L ramps up. However, when the OSC switches after 1 minute, Gyre_L runs Gyre_Day_Down at the end intensity immediately (25) and Gyre_R runs Gyre_Day_Up at end intensity (100) immediately for 1 minute until it switches again. The same behavior happens with the night profiles but with the different corresponding end intensities immediately. Any help would be greatly appreciated!
Code:
[OUTLETS]
Name: Gyre_R - (base_Var1)
Control: Advanced
Advanced Setup:
If Time 11:30 to 17:00 Then Gyre_Day_Up
If Time 17:00 to 18:00 Then Gyre_DayPls
If Time 18:00 to 22:30 Then Gyre_Day_Up
If Time 22:30 to 11:30 Then Gyre_Nt_Up
If Outlet Virt_Dy_Gyre = ON Then Gyre_Day_Dn
If Outlet Virt_Nt_Gyre = ON Then Gyre_Nt_Dn
If FeedA 000 Then OFF
If FeedC 000 Then OFF
---------------------------------------------
Name: Gyre_L - (base_Var2)
Control: Advanced
Advanced Setup:
If Time 11:30 to 17:00 Then Gyre_Day_Dn
If Time 17:00 to 18:00 Then Gyre_DayPls
If Time 18:00 to 22:30 Then Gyre_Day_Dn
If Time 22:30 to 11:30 Then Gyre_Nt_Dn
If Outlet Virt_Dy_Gyre = ON Then Gyre_Day_Up
If Outlet Virt_Nt_Gyre = ON Then Gyre_Nt_Up
If FeedA 000 Then OFF
If FeedC 000 Then OFF
----------------------------------------------
Name: Virt_Dy_Gyre - (Cntl_A1)
Control: Advanced
Advanced Setup:
OSC 000:00/001:00/001:00 Then ON
If Time 17:00 to 18:00 Then OFF
If Time 22:30 to 11:30 Then OFF
----------------------------------------------
Name: Virt_Nt_Gyre - (Cntl_A2)
Control: Advanced
Advanced Setup:
OSC 000:00/003:00/003:00 Then ON
If Time 11:30 to 22:30 Then OFF
-----------------------------------------------
[PROFILES]
Name: Gyre_Day_Up(PF1)
Control: Ramp
Ramp Time: 1
Start Intens: 25
End Intens: 100
-----------------------------------------------
Name: Gyre_Day_Dn(PF2)
Control: Ramp
Ramp Time: 1
Start Intens: 100
End Intens: 25
-----------------------------------------------
Name: Gyre_DayPls(PF3)
Control: Pump
Initial Off: 0
On time: 10
Off time: 5
Min Intens: 25
Max Intens: 90
-----------------------------------------------
Name: Gyre_Nt_Up(PF4)
Control: Ramp
Ramp Time: 3
Start Intens: 25
End Intens: 50
-----------------------------------------------
Name: Gyre_Nt_Dn(PF5)
Control: Ramp
Ramp Time: 3
Start Intens: 50
End Intens: 25
-----------------------------------------------
Bookmarks