Page 2 of 2 FirstFirst 12
Results 26 to 39 of 39

Thread: Alternate Pumps ON/OFF

  1. #26
    Frequent Contributor
    Join Date
    Apr 2013
    Location
    Santa Cruz, CA
    Posts
    1,842
    Quote Originally Posted by TooManyHumans View Post
    Sorry for been a little stupid I just got my Apex.

    So how do you create a virtual outlet? I see the profiles etc
    Please post your questions next time in the appropriate Sub-Thread.

    Here is a sticky that explains how to create VOs
    https://forum.neptunesystems.com/sho...irtual-Outlets
    Jon

  2. #27
    Regular Vistor
    Join Date
    Mar 2016
    Location
    New York
    Posts
    26
    How do you post a pic from a mac?

  3. #28
    Frequent Contributor
    Join Date
    Apr 2013
    Location
    Santa Cruz, CA
    Posts
    1,842
    Quote Originally Posted by Carlos_rendon View Post
    How do you post a pic from a mac?

    Here is a sticky on how to do this:
    https://forum.neptunesystems.com/sho...g-Screen-Shots
    Jon

  4. #29
    New User
    Join Date
    Mar 2016
    Location
    IRELAND
    Posts
    11
    Thanks

  5. #30
    New User
    Join Date
    Mar 2016
    Location
    IRELAND
    Posts
    11
    Hi I have created a VO and called it WAV-OSC. I have also created a profile called malibu20
    In the VO I inserted time line OSC 000:00/030:00/030:00 Then ON
    and in left wav config I put If Outlet WAV-OSC = ON Then Malibu20
    and right wav config I put If Outlet WAV-OSC = OFF Then Malibu20

    is their anything I might be missing as this does not work for me.

  6. #31
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,464
    You are missing the required Set statement in the WAV outlets. See the code I provided in the second post in this thread.
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  7. #32
    New User
    Join Date
    Mar 2016
    Location
    IRELAND
    Posts
    11
    Thanks Russ I think I have it now thanks.
    Ill see if they switch over in 30mins.

    What does the Set off command do?
    I'm not much good with Pcs

    Also when I first installed the wavs I set them up to output at different % over a 24 hr period will this now be overwritten by the new commands I setup.

  8. #33
    New User
    Join Date
    Mar 2016
    Location
    IRELAND
    Posts
    11
    image.jpgSorry the wavs are working correctly. I had them switching off for manual feeding using feedD but this has stopped working after setting up the alternating wav. Where have I gone wrong. Thanks.
    Attached Images Attached Images

  9. #34
    Regular Vistor
    Join Date
    Mar 2016
    Location
    New York
    Posts
    26
    I seem to have gotten the commands straight to alternate between Pulse for what ever tie i need, now my question is, is there a way to be able to set the commands for certain times. These are the commands that are functioning for my pumps

    [Wav_Right]
    Set OFF
    If Outlet Wav-Osc = OFF Then Pulse
    If FeedB 010 Then OFF


    [Wave_Left]
    Set OFF
    If Outlet Wav-Osc = ON Then Pulse

    Would i be able to set the virtual outlet to run at certain times through out the day, being that the command is for a VO?

  10. #35
    Regular Vistor
    Join Date
    Mar 2016
    Location
    New York
    Posts
    26
    Any help would be greatly appreciated

  11. #36
    New User
    Join Date
    Feb 2017
    Location
    Raleigh, NC
    Posts
    11
    I've been playing with my WAV flow settings too and am trying this out.
    I have my right pump set as the master and i vary the power and mode.. the left is set as an inverse of the right and I wanted to shut it off with intervals to vary the flow in the tank.
    This seems to work as intended shutting the left WAV off for the times specified and then putting it back in auto for times not specified.
    If Time 01:00 to 01:10 Then OFF
    If Time 01:40 to 01:50 Then OFF
    If Time 02:20 to 02:30 Then OFF
    If Time 03:00 to 04:00 Then OFF
    If Time 04:30 to 05:00 Then OFF
    If Time 05:30 to 05:40 Then OFF
    If Time 06:10 to 06:20 Then OFF
    If Time 07:00 to 07:10 Then OFF
    If Time 08:10 to 08:20 Then OFF
    If Time 09:00 to 09:10 Then OFF
    If Time 10:30 to 10:40 Then OFF
    If Time 11:30 to 11:40 Then OFF
    If Time 12:30 to 12:40 Then OFF
    If Time 14:30 to 14:40 Then OFF
    If Time 16:30 to 16:40 Then OFF
    If Time 17:30 to 17:40 Then OFF
    If Time 18:30 to 18:40 Then OFF
    If Time 19:30 to 19:40 Then OFF
    If Time 20:30 to 20:40 Then OFF
    If Time 21:30 to 21:40 Then OFF
    If Time 22:30 to 22:40 Then OFF
    If Time 23:20 to 23:40 Then OFF
    If FeedA 000 Then OFF

  12. #37
    New User
    Join Date
    Mar 2017
    Location
    VA, eastern time
    Posts
    6
    Is there a place or site that has commands already written out for newbies like myself to copy. Ive been using the following commands and get this error:

    [ WAV-OSC ]
    FALLBACK OFF
    OSC 000:00/000:06/000:06 Then ON

    [ WAV_Left ]
    Set OFF
    If Outlet WAV-OSC = ON Then WAV_PULSE

    [ WAV_Right ]
    Set OFF
    If Outlet WAV-OSC = OFF Then WAV_PULSE

    Apex command.PNG

  13. #38
    New User
    Join Date
    Mar 2017
    Location
    VA, eastern time
    Posts
    6
    I figured the problem out, no pulse profile, thanks.

  14. #39
    New User
    Join Date
    Mar 2017
    Location
    VA, eastern time
    Posts
    6
    Now that i've got my pumps to work on and off.

    I want them to be calm from say 7pm to 8am, then go back to making waves the rest of the time. How do i program that?

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Alternate to OS-1
    By Leeu in forum Fluid Monitoring Module (FMM), FMK, ATK, LDK, and FMM Accessories
    Replies: 2
    Last Post: 11-19-2017, 09:17
  2. How do u make them alternate
    By Stackhous in forum WAV Powerheads
    Replies: 1
    Last Post: 06-21-2017, 13:36
  3. Help! I think this is easy - just want an outlet to alternate on and off...
    By meegwell in forum Misc Apex Usage & Programming
    Replies: 2
    Last Post: 03-21-2017, 06:26
  4. Review My Program 2x RW8 pumps wanting them to alternate.... but they both stay on.
    By Hfp75 in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 11
    Last Post: 04-25-2015, 11:43

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •