Please post your questions next time in the appropriate Sub-Thread.
Here is a sticky that explains how to create VOs
https://forum.neptunesystems.com/sho...irtual-Outlets
Please post your questions next time in the appropriate Sub-Thread.
Here is a sticky that explains how to create VOs
https://forum.neptunesystems.com/sho...irtual-Outlets
Jon
How do you post a pic from a mac?
Here is a sticky on how to do this:
https://forum.neptunesystems.com/sho...g-Screen-Shots
Jon
Thanks
Hi I have created a VO and called it WAV-OSC. I have also created a profile called malibu20
In the VO I inserted time line OSC 000:00/030:00/030:00 Then ON
and in left wav config I put If Outlet WAV-OSC = ON Then Malibu20
and right wav config I put If Outlet WAV-OSC = OFF Then Malibu20
is their anything I might be missing as this does not work for me.
You are missing the required Set statement in the WAV outlets. See the code I provided in the second post in this thread.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Thanks Russ I think I have it now thanks.
Ill see if they switch over in 30mins.
What does the Set off command do?
I'm not much good with Pcs
Also when I first installed the wavs I set them up to output at different % over a 24 hr period will this now be overwritten by the new commands I setup.
image.jpgSorry the wavs are working correctly. I had them switching off for manual feeding using feedD but this has stopped working after setting up the alternating wav. Where have I gone wrong. Thanks.
I seem to have gotten the commands straight to alternate between Pulse for what ever tie i need, now my question is, is there a way to be able to set the commands for certain times. These are the commands that are functioning for my pumps
[Wav_Right]
Set OFF
If Outlet Wav-Osc = OFF Then Pulse
If FeedB 010 Then OFF
[Wave_Left]
Set OFF
If Outlet Wav-Osc = ON Then Pulse
Would i be able to set the virtual outlet to run at certain times through out the day, being that the command is for a VO?
Any help would be greatly appreciated
I've been playing with my WAV flow settings too and am trying this out.
I have my right pump set as the master and i vary the power and mode.. the left is set as an inverse of the right and I wanted to shut it off with intervals to vary the flow in the tank.
This seems to work as intended shutting the left WAV off for the times specified and then putting it back in auto for times not specified.
If Time 01:00 to 01:10 Then OFF
If Time 01:40 to 01:50 Then OFF
If Time 02:20 to 02:30 Then OFF
If Time 03:00 to 04:00 Then OFF
If Time 04:30 to 05:00 Then OFF
If Time 05:30 to 05:40 Then OFF
If Time 06:10 to 06:20 Then OFF
If Time 07:00 to 07:10 Then OFF
If Time 08:10 to 08:20 Then OFF
If Time 09:00 to 09:10 Then OFF
If Time 10:30 to 10:40 Then OFF
If Time 11:30 to 11:40 Then OFF
If Time 12:30 to 12:40 Then OFF
If Time 14:30 to 14:40 Then OFF
If Time 16:30 to 16:40 Then OFF
If Time 17:30 to 17:40 Then OFF
If Time 18:30 to 18:40 Then OFF
If Time 19:30 to 19:40 Then OFF
If Time 20:30 to 20:40 Then OFF
If Time 21:30 to 21:40 Then OFF
If Time 22:30 to 22:40 Then OFF
If Time 23:20 to 23:40 Then OFF
If FeedA 000 Then OFF
Is there a place or site that has commands already written out for newbies like myself to copy. Ive been using the following commands and get this error:
[ WAV-OSC ]
FALLBACK OFF
OSC 000:00/000:06/000:06 Then ON
[ WAV_Left ]
Set OFF
If Outlet WAV-OSC = ON Then WAV_PULSE
[ WAV_Right ]
Set OFF
If Outlet WAV-OSC = OFF Then WAV_PULSE
Apex command.PNG
I figured the problem out, no pulse profile, thanks.
Now that i've got my pumps to work on and off.
I want them to be calm from say 7pm to 8am, then go back to making waves the rest of the time. How do i program that?
Bookmarks