I need some help getting this to work.
I purchased the icecap control along with the alternate Gyre mode modified cable. All is installed. I see a green light on the icecap.
My current programming is:
Variable Speed Port VarSpd3_I3 renamed GyreSPD
Code within:
Set ON
If Time 08:00 to 19:00 Then GyreDaySPD
If FeedA 000 Then OFF
Variable Speed Port VarSpd4_I4 renamed GyreDIR
Code within:
If Time 08:00 to 19:00 Then GyreDayDIR
If FeedA 000 Then OFF
------------------------------------------------------------
Program ID 11
Profile Name: GyreDaySPD
Control Type: Pump
Synchronize Enable: No
Divide by ten: No
Initial Time Off: 0
On time: 30
Off time: 30
Minimum intensity: 0
Maximum intensity: 100
Program ID 12
Profile Name: GyreDayDIR
Control Type: Pump
Synchronize Enable: Yes
Divide by ten: No
Initial Time Off: 0
On time: 30
Off time: 30
Minimum intensity: 0
Maximum intensity: 100
Bookmarks