I have a chiller for summers and heaters for winters obviously, now I do not want stagnant water to stay in my lines for the chiller as I have that set up as its own system. would running the chiller pump 4 times a day for 10 min be enough to keep any damage or nastyness from building up? also this is the codes I have do they look right? I want the pump to turn on with the chiller and then just the pump to run at the specified times for 10 min. thank you for your help
Chiler_EB8_4
Fallback ON
If Tmpx3 > 76.0 Then ON
If Tmpx3 < 75.5 Then OFF
Chiler_Pmp_6
Fallback ON
If Tmpx3 > 76.0 Then ON
If Tmpx3 < 75.5 Then OFF
If Time 06:00 to 06:10 Then ON
If Time 12:00 to 12:10 Then ON
If Time 18:00 to 18:10 Then ON
If Time 00:00 to 00:10 Then ON
Bookmarks