I setup my DOS with Dual reservoir .. and it works fine.
I have the graph of dosing...
But, my level's graph does not show up ?
How can I get that to show in Fusion ?
Cable is attached.
I setup my DOS with Dual reservoir .. and it works fine.
I have the graph of dosing...
But, my level's graph does not show up ?
How can I get that to show in Fusion ?
Cable is attached.
I assume you checked the unused tiles. Do you see the switches for the reservoirs? What do you mean by it works fine?
My DOS did not recognize the switches or have the level tiles until I upgraded the firmware on the DOS, not the Apex box but the DOS box. Check configruation->module setup in the classic dashboard and on the bottom is list of your modules and the SW rev should be OK.
How did you update the firmware on the DOS - I cant find that anywhere on the site.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
how do you update firmware for dos in fusion
Module update using Fusion is not available for Apex Classic models, but it is for the Apex 2016 model. Your profile here says you have a new one, so you can do it. Click the Expand button (3 gears) then click the Modules button. Select the DOS from the list. In the Action field, choose Update Firmware. Click the Send button to make it happen.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Hi...i am a new here. I want to know if you see the switches for the reservoirs? What do you mean by it works fine? In my case DOS did not recognize the switches or have the level tiles until I upgraded the firmware on the DOS, not the Apex box but the DOS box. Check configruation->module setup in the classic dashboard and on the bottom is list of your modules and the SW rev should be fine.
Ok i have done everything stated here to get the DŌS DUAL RESERVOIRto show up on the dash board. When i first installed it everything worked fine then today it was gone from the dashboard!
I'M having same problem,installed it six Months ago everything on screen and working fine but two day ago, DŌS DUAL RESERVOIR disappeared from my screen
Did this issue get resolved? I am having the same issue after updating the Apex firmware. Thanks.
Bookmarks