With regard to the 4 VARSP ports do they have to be left on, off or auto on dashboard, this may be a silly question but better to be safe than sorry
With regard to the 4 VARSP ports do they have to be left on, off or auto on dashboard, this may be a silly question but better to be safe than sorry
If you are not using them, then it doesn't matter.
If you are using one or more, then it/they must be in AUTO for programming to be executed.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
I do have a question about this. I using the varsp 2 for my octo varios 4 and it’s connected and running but Iam trying to view the watt consumption I can’t find on the drag down list like the light 1A1w.
- - - Updated - - -
Oh the actual power cord is not connected to the apex outlet just the phone jack cable. I figured save me a outlet on there. Is that ok.
Watts and Amps monitoring only works if the outlet in in an EB832 outlet. It would be nice if they let you put a min max power and have it approximate based on percentage, but currently amps and watts are only available on the EB832.
Sent from my SM-G965U using Tapatalk
Bookmarks