Results 1 to 8 of 8

Thread: Apex 2016 custom installation and question

  1. #1
    Regular Vistor
    Join Date
    Dec 2016
    Location
    montreal, quebec
    Posts
    43

    Apex 2016 custom installation and question

    here is my custom installation over our 5'x7' 500 gallon show tank show tank in our store so far everything doing well











    Same tank before the remake it was mature but lately i was battling with AEF, marjano and some other polip growing everywhere



  2. #2
    Regular Vistor
    Join Date
    Dec 2016
    Location
    montreal, quebec
    Posts
    43
    I have read on Terence r2r post that Maxspect ethereal fixture are APEX ready since i dont want to highjack is tread could someone help me on this I have 11 ethereal on that 500 gallon puppy and would love to control them whit my APEX
    Attachment 6540


  3. #3
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    17,923
    The ability to control Ethereals is not yet available.
    I'm not a Neptune support rep. Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  4. #4
    VP Sales and Marketing Terence's Avatar
    Join Date
    Jan 2013
    Location
    Morgan Hill, CA
    Posts
    986
    Quote Originally Posted by reefsolution View Post
    I have read on Terence r2r post that Maxspect ethereal fixture are APEX ready since i dont want to highjack is tread could someone help me on this I have 11 ethereal on that 500 gallon puppy and would love to control them whit my APEX
    Attachment 6540

    With the introduction of our IoTa spec (Internet of Things, Aquariums), we have the ability for many wireless aquarium devices to tie nicely into the Apex universe. The most common way to do this, the manufacturer must first obtain the API and information and then integrate an "IoTa mode" into their device. The first devices that will feature this 3rd party wireless integration will be the Ethereal from MaxSpect and the HD fixtures from AI. We demonstrated both of these at MACNA 2016.

    Although we have some working prototypes, it seems that the update for the IPV6 is not yet ready from MaxSpect for release and this controller of theirs is where all the "brains" of their products' integration lies. At this point I cannot even comment whether the the IoTa mode will be enabled for the public in an update to existing IPV6, a new version of the IPV6, or an altogether new "Maxspect Controller". This is all out of our hands. Your best bet is to contact MaxSpect, tell them you saw the integration at MACNA, and ask them when and how they believe they will bring it to market.
    Terence Fugazzi :: VP Sales and Marketing :: Neptune Systems

  5. #5
    Regular Vistor
    Join Date
    Dec 2016
    Location
    montreal, quebec
    Posts
    43
    Thank Guy appreciate will ask them and let you know if there is any development on there side

    Im wondering is it normal on my DOS the nice orange logo it not solid only tip are organ not like the power bar and apex modul?

  6. #6
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    17,923
    Quote Originally Posted by reefsolution View Post
    Thank Guy appreciate will ask them and let you know if there is any development on there side

    Im wondering is it normal on my DOS the nice orange logo it not solid only tip are organ not like the power bar and apex modul?
    It is normal. The whole logo does not light up. The lower left LED is for pump1, upper right is for pump 2.
    I'm not a Neptune support rep. Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  7. #7
    Regular Vistor
    Join Date
    Dec 2016
    Location
    montreal, quebec
    Posts
    43
    Thank Russ

  8. #8
    Marine Aquarist FLSharkvictim's Avatar
    Join Date
    Jun 2016
    Location
    Redington Beach, FL
    Posts
    100
    What kind of lights are you running on that monster?
    Stay Connected with me here:
    https://www.facebook.com/FLSharkvictim

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •