wave sicce voyager

[staggeringwade1969]

I have a Sicce Voyager HP plugged into an outlet.
My two goals are to set up the pump to cycle on and off every 10 minutes. Turn off from 10PM to 5AM.



Below is currently the settings that customer support helped me setup yesterday.

Fallback ON
Set ON
If Output vFeed = ON Then OFF
If FeedD 000 Then OFF
Defer 010:00 Then ON


Thanks!

[BrettS]

You could do this:

Fallback ON
OSC 000:00/019:59/000:001 Then ON
If Time 22:00 to 05:00 Then OFF
If Output vFeed = ON Then OFF
If FeedD 000 Then OFF
Defer 010:00 Then ON

Also note that I left the FALLBACK ON command, since that’s what you had, but that means that if the apex fails or gets disconnected for some reason then the pump will default to being on. You might want to change that to OFF if you would rather have it off during those events.

[staggeringwade1969]

Thank you, I'll test this out.