I am working with a general contractor to determine the smallest size generator that will work for a large aquarium we are installing.
The Apex will know there is a power outage within three seconds as it will have the 12v adapter plugged into an outlet that isn’t on the generator. The EB832s will be plugged into outlets that will be run by the generator, but will not have power for 10-20 seconds as the generator starts to boot up.
If the whole aquarium system needs 80amps to run normally, but the generator can only handle 30amps I could program the Apex keep a lot of stuff off(like most of the lighting and heating). But when the EB832s get power when the generator comes online can I trust they will never ask for the full 80amps?
Appreciate your advice and feedback here.
Bookmarks