K so finally got the apex set up...im trying to start programming outlets but i have no ideal which of these is for which outlet on the power bar. I have the classic with power bar 8. How do i tell which is for which plug. Thank you
K so finally got the apex set up...im trying to start programming outlets but i have no ideal which of these is for which outlet on the power bar. I have the classic with power bar 8. How do i tell which is for which plug. Thank you
It looks like there are only 4 outlets there (4_1, 4_2, etc). Maybe the other 4 are on the unused tiles tab? If you go to the outputs page it should make more sense.
See my EB8 outlets below?
outputs.PNG
If you have a classic Apex you can go to the classic dashboard, not Fusion like you show here, and change the names of the outlets. Configuration-module setup will get to the module page. select your EB from the list and it will have "(EB8 module -N)" with N being the number of your EB, probably 4. Now go to Configuration-outlet setup and the list will have "(N_X)" on the end of all the entries. The ones where N matches your EB8 will have 1-8 as X. They match the outlets on your EB. Select one and you can change the name to whatever, almost, you want. After you have good names use Fusion to program them.
Bookmarks