When will the COR pumps be released? Or when are they expected to release?
When will the COR pumps be released? Or when are they expected to release?
Very likely will be released soon.
6:30 min mark
https://m.youtube.com/watch?v=8dXd7Fe79sw
Any word on the release of the COR
Saw a post on Reef2Reef yesterday - looks like they are shipping some units to the Insiders/beta testers. My guess is an announcement at MACNA with a release this fall unless something comes up in testing.
Sell me on the Cor vs the ecotec model
The Ecotech pump will only have ON/OFF control no feed cycles or ramping control as currently the Ecotech return pumps are not able to be controlled with the WXM module.
Jon
There are many reports of issues with Reeflink, and they're not compatible with any controllers to my knowledge. Heat production has also been an issue with them.
The Vectra pumps are decent pumps, but the pump market is getting crowded and there are better options for your money, IMO
if the build on the cor any good as i have had a lot of issues with my wavs and have to go back to my ecotechs
One of my Wavs died at exactly what 2 years. My MP 40 is running fine.
What's sad is I bought 4 jaebos at the same time and 3 of them have outlasted one of the Wavs.
Still, I want everything controllable within fusion so the vectra is a no go.
So it's going to come down to price.
Sent from my SM-G950U1 using Tapatalk
I REALLY like the controllability of the COR pump. With the COR, I'm able to keep it running at 5% during a feed mode, as opposed to completely off. This keeps the air out of return lines, and then, when the feed mode is done, I have a ramp from 5% to 56% that no longer involves a million micro bubbles being blasted into the tank, and onto the corals on top of my reef.
So was anything said about the COR at MACNA such as the release date and price?
Sent from my SM-T800 using Tapatalk
NEVERMIND - I forgot the EB832 is not backwards compatible with my classic.
****Does the COR have a dedicated power supply ( I assume due to consumption that it does ) or can it be plugged directly into an eb832 24v port? If the new Energy Bar could be of benifit... I may pick one up on sale in anticipation of the COR
Dentnshell check out the post below. Terence listed the power info for the Cor-15 and Cor-20 about 4 days ago.
- General Forums
- News and Announcements
- Neptune Return Pump
Any word on the wattage supplied by the Cor-15 power supply? Still trying to find out if my EB832 1link ports supplying 100 watts will be enough to run two Cor-15s and a single Wav.
Does the Cor-15 power supply list the output wattage?
Being that the Cors come with their own power supplies then the 1Link would just be used for controlling the pumps if the Cor power supplies are used right?? If that is the case then two cors and a wav could be safely plugged into the 832 1Link ports. The only downside would be having the power bricks taking up space.
Bookmarks