I'm using 2 PP-4 pumps and no matter what I do it seems like they only ever output at 5-10% power, way less than the lowest setting the jebao controller gives. I initially thought the issue was with the adapter, so I ordered a second, but it has the issue as well. I am using a 24v 6a power supply, so that shouldn't be an issue either. any thoughts?
Simple program I am using:
[Wave1a]
Type: Pump
Synchronize: Disable
Divide By 10: Enable
Initial Off Time: 0
On Time: 8
Off Time: 4
Minimum Intensity: 0
Maximum Intensity: 100
PP_Left:
Fallback OFF
If Time 10:00 to 22:00 Then Wave1a
If Time 22:00 to 10:00 Then Night
If FeedA 000 Then OFF
Thanks.
Bookmarks