I assume this is going to be a hardware issue, but I wanted to exhaust my options first.
Following a ATK installation, I have a 24v outlet on my EB832 that is stuck on.
Power flows freely, and the status LED on the EB is lit.
I have changed the status to Always Off, Advanced with Fallback OFF and set OFF, and it still stays on. I added a tile to the dashboard and turned it off, still on.
Just curious if there is anything else I'm missing that can be overriding it when manually told to be off.
Also, I have all firmware up to date, but I have updated the firmware on the EB anyways, and restarted the whole system.
Thanks for any advice!
Bookmarks