Reverse operation

[Scubabermuda]

Hello,

Would someone kindly guide me how to setup 2 wavs in reverse operation. As in WAV 1 on for 10 seconds then WAV 2 on for 10.

Btw I just got these heads and they are beyond amazing. Very quite

Thanks !

Sent from my Pixel XL using Tapatalk

[Alain B]

Set the master pump the way you like , and set the slave to inverse 100% , they will work the same but in opposite way .

[Scubabermuda]

Thank you

Sent from my Pixel XL using Tapatalk

[Scubabermuda]

Alain,

Follow-up questions.

My master pump will not pulse although I have it programmed to. Inverse set on slave @ 100. It's a constant flow on the master. Any ideas? Flowing constant at 30

Sent from my Pixel XL using Tapatalk

[Scubabermuda]

Salve is pulsing

Sent from my Pixel XL using Tapatalk

[Scubabermuda]

Maybe reverse config? Or switch ports?

Sent from my Pixel XL using Tapatalk

[Alain B]

Maybe reverse config? Or switch ports?

Sent from my Pixel XL using Tapatalk

Forget the slave as for the programming , concentrate on the master . How do you set the master pump ? Can you post a screenshot of the pump graph ? Like the one i am just posting . In addition , any pump can be master or slave , it's up to you to decide which one . Capture pump.PNG

[Scubabermuda]

Here

Sent from my Pixel XL using Tapatalk

[Alain B]

Here is a screenshot of what inverse 100 % should look : Capture pump 2.PNG tab mark " unknow " Is where you select the master pump.

[Scubabermuda]

Ok copied. Master still running at 30 constant

Sent from my Pixel XL using Tapatalk

[Alain B]

It is set to run constant from midnight to 7.00 am , what time now are you place ? Did you upload the programming to the pump ?

[Scubabermuda]

The screen shot I uploaded is from the master. Pulse is selected at 30

Sent from my Pixel XL using Tapatalk

[Alain B]

Did you upload the programming ?

[Scubabermuda]

Yes

Sent from my Pixel XL using Tapatalk

[Scubabermuda]

Does the Apex recognize one port as master and one as slave? Or it does not matter

Sent from my Pixel XL using Tapatalk

[Alain B]

Nope , the Apex does not make any difference between the 2 by itself , it's up to you to decide which one you want as a master . As for me , the master is on the left side and the slave on the right . When you program the slave , you have to refer to the master pump , then it will work correctly .

[Scubabermuda]

Ok thanks. I'll call Neptune I'm all check mated out. Thanks for your help!

Sent from my Pixel XL using Tapatalk

[RussM]

Post the other pump's schedule, and be sure you have a Reference pump selected for each and every schedule point that is using Mirror or Inverse.

[Scubabermuda]

I will russ thanks. Gotta take the wife out for dinner. I'll follow up in the AM

Sent from my Pixel XL using Tapatalk

[Scubabermuda]

For now

Sent from my Pixel XL using Tapatalk