-
New User
Best bang for your buck
What is the best, cheapest, and most simple and easy to program camera to use with fusion?
I'm not a tech specialist or a programming guru and just looking for something cheap and simple that will allow me to view my aquarium while I'm not home.
Sent from my iPhone using Tapatalk
-
Frequent Visitor
Jose,
Not sure that there is anything simple. You will need basic understanding of Networking. Take a look at my post right underneath here...
Steve
-
Frequent Visitor
You can use an Ipad or an old Iphone. There's a couple of good videos on YouTube showing step by step.
-
I would recommend staying with some of the better supported cameras like dlink, foscam, netgear, Belkin, etc. Even a cheapo will work with fusion as long as it has an ip video stream, but the correct url is often bard to find and features like pan tilt zoom are only available from the native app and not in fusion. The name brands tend to be better from this perspective.
You might be an engineer if...You have no life and can prove it mathematically.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks