I know this is a older thread but did this ever work?
I know this is a older thread but did this ever work?
Hello All & Merry Christmas! I'm looking to add a GHL Propellor Breeze fan along with the Propellor Control 2.1 Controller. I would like to plug this into my Apex 0-10v port.
First, before purchasing, is this all I need along with a program statement such as below?:
Set OFF
If Temp > 79.0 Then 10
If Temp > 79.1 Then 20
If Temp > 79.2 Then 30
If Temp > 79.3 Then 40
If Temp > 79.4 Then 50
If Temp > 79.5 Then 60
If Temp > 79.6 Then 70
If Temp > 79.7 Then 80
If Temp > 79.8 Then 90
If Temp > 79.9 Then 100
If Temp > 100 Then 10
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Thanks Russ.
The primary question I had is that would the GHL fan and controller cable work and be compatible with the Neptune 0-10v port by simply plugging in the cable with no other mods? I just copied and pasted the program from my post from one of the OPs above and will take your advice on using the OFF statement potentially. Thanks!
Hi - just a friendly follow up from my last post. Thanks
Hi again - just following up. Has anyone successfully connected a GHL fan and controller cable work to a Neptune 0-10v port by simply plugging in the cable with no other mods? Here are the links to the fan and cable:
https://www.bulkreefsupply.com/prope...g-fan-ghl.html
https://www.bulkreefsupply.com/prope...oller-ghl.html
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Ok thanks Russ. If anyone on this thread has had success making their own cable, I would be interested in purchasing one from you. Please PM if so. Thanks.
Bookmarks