I have been trying to control 2 DC pumps via the variable speed ports to no avail. I need to confirm if the ports are working correctly before I dive into the pumps themselves. Here is what I am doing and the results.
I am testing via male ethernet cable end (patch cable)... so pins go R to L 1-8.
I am getting 0v between 1&2 and 5&6 (which I believe are +/- V for V1 and V2 respectively)
I am getting 10-14v between pin 6&8 and 2&8? (so 2 and 6 are hot) and 8 is ground?
Bookmarks