Results 1 to 2 of 2

Thread: i have a apex classic energy bar 8 and pmup

  1. #1
    New User naz.'s Avatar
    Join Date
    May 2017
    Location
    mazatlan
    Posts
    3

    i have a apex classic energy bar 8 and pmup

    hi i got the pmup for my apex classic with energy bar 8 no additional modules and i was wondering what module i need to buy to run 3 pmup pumps. can my apex do it by it self ?

    thank you

    i also like to know what module to use to control my reef octopus regal 200 int. with my apex

  2. #2
    Apex User zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    6,624
    You have a few options or could use a combination

    1. Connect the PMUP to a 24V power supply and plug that into an energy bar outlet.
    2. Purchase a EB832 that will give you (2) 24V ports
    3. Purchase a 1 link module that will give you (2) 24V ports
    4. Purchase a FMM that will give you (1) 24V port.


    To control the skimmer you just need a Y cable and an open VDM port. The first listing I found was out of stock, but this is what you need.

    http://www.coralvue.com/icecap-y-module-cable

    You might be an engineer if...You have no life and can prove it mathematically.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •