I keep getting this alarm for skimmer. What does it mean? The skimmer is working.
Sent from my iPhone using Tapatalk
I keep getting this alarm for skimmer. What does it mean? The skimmer is working.
Sent from my iPhone using Tapatalk
It means your skimmer is drawing less than 0.5A (60-70 Watts.
That sounds a bit high of wattage for a skimmer pump. You sure you set that low enough? How many watts is your skimmer?
You might be an engineer if...You have no life and can prove it mathematically.
It's a Hydro slim for a 30gal nano. Should only draw 4-5watts max. Thoughts?
Sent from my iPhone using Tapatalk
That's a small enough wattage that the amp or watt lines cannot reliably measure it. I would remove that line completely.
You might be an engineer if...You have no life and can prove it mathematically.
Thank you!
Sent from my iPhone using Tapatalk
The EB832 *CAN* measure small loads in watts quite well. Instead of using an alarm trigger for Amps, use one for one Watts.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Bookmarks