Originally Posted by
zombie
Use defer for this case. Defer means wait to turn on until everything above it is back to normal (what you want). Min Time means if I turn off, I will stay off for at least 5 minutes (good for ATO, fans, chillers, not so much for skimmers).
There are some changes I would recommend though.
1. Add the line below and replace Return with the actual name of your return pump.
If Outlet Return = OFF Then OFF
Your low switch should catch this issue, but this will make sure it's always off if your return is off.
2. Unless you intend to have the skimmer off for 10 minutes after a feed cycle ends, change the 005 in the feed line to 000.
You might be an engineer if...You have no life and can prove it mathematically.
Bookmarks