I have two tanks, with two Apex classics, running latest firmware. I have one tank with G3 and one with G4 radions (all with their latest version of firmware), they are connected and running through their programming as I would expect. Now each of the WXM's have the latest firmware and RF updates, and each is operating on their own channel.
Why is it, sometimes, a random radion with just 'shut off' (turn off) and go missing as displayed in Fusion. All I have to do is wait a few minutes and it will magically turn back on and follow it's programming as per usual. It's random, never the same light all the time, and it happens on BOTH tanks. Always has, I just assumed it was some minor glitch. But lately it 'appears' to be happening with increased frequency.
So, I have performed factory resets on all the lights, then deleted the outlets and then re-attached them. It seems to prolong the 'missing' occurrence but eventually, over time, it returns. When the lights go missing there truly are missing, if I try to adjust their setting manually, they do not respond until the spontaneously re attach to the WXM.
This has always been going on with my tanks, but it's getting annoying. Am I missing something?
Bookmarks