The impeller on my PMUP shattered a couple of weeks ago and I received the replacement last Wednesday. So I manually topped off for 5 or 6 days. Ever since the new one arrived I have been getting errors because the fill up time exceeds the max time programmed. Well, today I had a few extra minutes before moving onto the next honey-do. I manually turned on the PMUP and noticed a HEAVY stream coming out of the anti-siphon. Looking at the outlet in my sump I found virtually no output. Just a few drips. I made sure the float was fully down and still nothing. When moving the float up the flow completely stopped. I removed the sensor assembly as far as I could (sensor wires zip tied onto other wires) and managed to blow into the outlet. Met ALOT of resistance. So obviously something is in there clogging it up. Am I able to take the sensor assembly apart and clean out the flow path? I dont want to start torquing on the nylon nuts and break something, so looking to get confirmation first.
Time to move onto the next chore my wife assigned me...
Bookmarks