Results 1 to 5 of 5

Thread: Apex classic malfunctioning HELPPPP!

  1. #1
    Wanna Be Control Freak RickHrdlicka's Avatar
    Join Date
    Oct 2013
    Location
    Inland Empire, California
    Posts
    220

    Apex classic malfunctioning HELPPPP!

    Was having an issue with current probe graphs not showing up in fusion. Restarted system now main module has a green light all modules have flashing yellow lights. System is running on the backup settings pump and skimmer on. Control panel is blank. Rebooted the system several times. HELPPPP,

    Rick
    300g Mixed Reef with Full apex, PM1, ALD, AWM, AFS, PM2

  2. #2
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    Unplug modules one at a time and then plug back in if it didn't make a difference to see if there is an offending module. If that doesn't change anything, try updating the firmware, webpages, and then individual module firmware.

    You might be an engineer if...You have no life and can prove it mathematically.

  3. #3
    Wanna Be Control Freak RickHrdlicka's Avatar
    Join Date
    Oct 2013
    Location
    Inland Empire, California
    Posts
    220
    Thank you

    Rick
    300g Mixed Reef with Full apex, PM1, ALD, AWM, AFS, PM2

  4. #4
    Wanna Be Control Freak RickHrdlicka's Avatar
    Join Date
    Oct 2013
    Location
    Inland Empire, California
    Posts
    220
    Looks as though the controller is dead. All modules everything unplugged from the controller. I connect directly to it and can't ping it or flash it. Plug the display module in and it is blank. All the var ports are on solid green and can't get the network sync light to flash at all. Opened a ticket. The worse part is I am leaving for four days tomorrow. Ugg!

    if it truly dead should I update to the new apex?

    all my probes are due for replacement.

    will the display module work on the new apex? I know all the others work? I have a large number of modules. Leak detection, orp, salinity, feeder, AWM, 3 power bars..

    feedback would be appreciated.

    Rick
    300g Mixed Reef with Full apex, PM1, ALD, AWM, AFS, PM2

  5. #5
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,464
    All of the modules work with the newer Apex.
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

Similar Threads

  1. Outlet malfunctioning?
    By 1lastcast in forum A2 Apex/ApexEL and A3 Apex Pro/Apex/Apex Jr
    Replies: 1
    Last Post: 05-20-2019, 05:56
  2. Helpppp
    By m_alrkyan in forum A2 Apex/ApexEL and A3 Apex Pro/Apex/Apex Jr
    Replies: 1
    Last Post: 07-27-2016, 04:52
  3. Probes malfunctioning
    By Smtwinn in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 11
    Last Post: 11-12-2015, 16:53
  4. Is my VSP malfunctioning?
    By SteveW25561 in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 5
    Last Post: 04-28-2014, 09:38
  5. Help! Helpppp cant access apex through internet!
    By icandelario in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 3
    Last Post: 07-28-2013, 15:34

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •