I have sync my date and time to my iphone a d it changed to 2008... October and the time is wrong also ... And i cant seem to change it back .. How do i put it back thanks
I have sync my date and time to my iphone a d it changed to 2008... October and the time is wrong also ... And i cant seem to change it back .. How do i put it back thanks
On the Configuration-Clock setup page, put auto-set to enabled, the DST setting to enabled, and the timezone to -5 (for Eastern time zone). Save those settings and reboot the Apex. Within a few minutes, the Apex will start using time servers out there on the Internet to maintain the system clock quite accurately.
Don't use the app sync time thingy.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
@RussM, where is the clock Configuration page? My TUNZE profiles are set up in PST and I would like them to be in EST.
2016 or classic apex?
You might be an engineer if...You have no life and can prove it mathematically.
Just do it on the display as it's just as easy. Navigate to system>clock setup and all the options are right there. After everything is set correctly, power cycle the apex.
You might be an engineer if...You have no life and can prove it mathematically.
Use the Classic Dashboard, Configuration-Clock Setup page. Refer to this for more info about properly setting the Apex clock: https://forum.neptunesystems.com/sho...ll=1#post96567
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
I set my clock on the Apex display and did a restart and I still have both times in Apex fusion.
Somehow you made it worse
The Apex settings should be:
Auto-set enabled
DST enabled
Time zone -5
Restart the Apex if you change anything, then wait a few minutes before checking in Fusion.
Also check the timezone configured in whatever device you are using to access Apex Fusion - ensure it is set to Eastern time w/ DST.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
The internal time sync in my apex Never worked...something about a memory issue I was told by customer service.
Sent from my iPad using Tapatalk
Bookmarks