Results 1 to 17 of 17

Thread: Amazon Fire app shows two clocks an hour apart on Fusion dashboard.

  1. #1
    Frequent Visitor powers2001's Avatar
    Join Date
    Aug 2013
    Location
    Montana
    Posts
    319

    Amazon Fire app shows two clocks an hour apart on Fusion dashboard.

    Amazon Fire app shows two clocks an hour apart on Fusion dashboard.

  2. #2
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,464
    The time zone setting on either the Apex or the Fire is not set properly for your location.
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  3. #3
    Frequent Visitor powers2001's Avatar
    Join Date
    Aug 2013
    Location
    Montana
    Posts
    319
    My Fire's time is the same as Fusion but still shows two different times--an hour apart. My ISP is based in the Pacific timezone but I'm in Mountain. I Googled instructions to change it and it didn't work.

  4. #4
    Frequent Visitor powers2001's Avatar
    Join Date
    Aug 2013
    Location
    Montana
    Posts
    319
    The Classic Dashboard is off a couple minutes from my timezone. How do I change this?

    And display.

  5. #5
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,464

    Amazon Fire app shows two clocks an hour apart on Fusion dashboard.

    Fusion itself does not have a time zone setting - it's a web site.

    If the Fire is set for Mountain Time, then the other possibility is the Apex. You now have an Apex 2016, right? So in Apex Local or in Apex Fusion, go to the Apex's clock settings and check the time zone - it still may be set to the default of -8 (Pacific Time)
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  6. #6
    Frequent Visitor powers2001's Avatar
    Join Date
    Aug 2013
    Location
    Montana
    Posts
    319
    I have Apex Classic. Are the instructions above the same? I can't check it now I work day shift on Sat.

  7. #7
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,464
    Then do the same thing, but use the Classic Dashboard (not Apex Fusion)
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  8. #8
    Frequent Visitor powers2001's Avatar
    Join Date
    Aug 2013
    Location
    Montana
    Posts
    319
    Clock setting timezone is at -7 and updated. Do I enable DST? C. dash Tank Time still ~2 min behind moountain time. I did something to the display about a week ago with settiing time but can't recall what is was.

  9. #9
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,464
    You live in a state that observes DST, so yes, DST should be enabled. Also, auto-set should be enabled. If you change either or both, restart the Apex.
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  10. #10
    Frequent Visitor powers2001's Avatar
    Join Date
    Aug 2013
    Location
    Montana
    Posts
    319
    now it's an hour and ~2 min behind mountain time after updating clock settings like you said.

  11. #11
    Frequent Visitor powers2001's Avatar
    Join Date
    Aug 2013
    Location
    Montana
    Posts
    319
    When you say restart the Apex what do you mean?

  12. #12
    Frequent Visitor powers2001's Avatar
    Join Date
    Aug 2013
    Location
    Montana
    Posts
    319
    bump

  13. #13
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    Quote Originally Posted by powers2001 View Post
    When you say restart the Apex what do you mean?
    That means power cycle or go to network>restart ON the display for a classic. For a 2016 just press the restart pinhole button on the unit.

    You might be an engineer if...You have no life and can prove it mathematically.

  14. #14
    Frequent Contributor
    Join Date
    Apr 2013
    Location
    Santa Cruz, CA
    Posts
    1,842
    Quote Originally Posted by zombie View Post
    That means power cycle or go to network>restart ON the display for a classic. For a 2016 just press the restart pinhole button on the unit. .
    In Apex Fusion or Apex Local for the 2016 go to the Misc Page (wrench Icon) and click reboot at the bottom of the page

    Capture.PNG
    Jon

  15. #15
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    Quote Originally Posted by jonmos75 View Post
    In Apex Fusion or Apex Local for the 2016 go to the Misc Page (wrench Icon) and click reboot at the bottom of the page

    Capture.PNG
    His ways better for a 2016. I own a classic so dont know the exact process.

    You might be an engineer if...You have no life and can prove it mathematically.

  16. #16
    Frequent Visitor powers2001's Avatar
    Join Date
    Aug 2013
    Location
    Montana
    Posts
    319
    Quote Originally Posted by zombie View Post
    That means power cycle or go to network>restart ON the display for a classic. For a 2016 just press the restart pinhole button on the unit.

    You might be an engineer if...You have no life and can prove it mathematically.
    Couldn't find this path on classic display. Will this work: Main Menu>System>Net Setup>Restart ?

  17. #17
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,464
    Quote Originally Posted by powers2001 View Post
    Couldn't find this path on classic display. Will this work: Main Menu>System>Net Setup>Restart ?
    Yes.
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

Similar Threads

  1. Question: Amazon fire 8hd
    By marchyboy in forum APEX Fusion
    Replies: 0
    Last Post: 01-07-2022, 07:38
  2. Help! Amazon Fire display questions
    By ricowind in forum APEX Fusion
    Replies: 13
    Last Post: 11-05-2017, 12:23
  3. Two Clocks Fusion Dashboard
    By davidtripp in forum APEX Fusion
    Replies: 2
    Last Post: 03-20-2016, 15:19
  4. Why the two clocks on Fusion dashboard?
    By Nola26 in forum APEX Fusion
    Replies: 5
    Last Post: 01-12-2015, 10:24

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •