This is my program for ATK_7_1
Fallback OFF
Set OFF
If Swx7_1 OPEN Then ON
If Swx7_2 CLOSED Then OFF
When On > 000:30 Then OFF
Defer 000:30 Then ON
Defer 000:30 Then OFF
Min Time 0:30 Then OFF
and this is my setting for ATK_3_7 [outlet where 24v FMM power is located}
Fallback OFF
Set OFF
If Sw1 OPEN Then ON
If Sw2 CLOSED Then OFF
Defer 001:00 Then ON
I installed this unit yesterday and tonight the water level rose above the optical sensors and the float shut it off
Is this correct, do I program the module ATK-7_1 and the outlet ATK_3_7?
Bookmarks