I am trying to make my ATO perform the following functions:
If switch 1 is closed for more than 1 minute, turn pump on
If switch 2 is closed - turn pump off (high float)
I want to make sure that if the pump runs longer than 2 minutes it shuts the ATO down, and I only want the ATO to run once an hour.
Have I got the right code?
Set OFF
If Sw1 CLOSED Then ON
If Sw2 CLOSED Then OFF
When On > 002:00 Then OFF
Defer 001:00 Then ON
Min Time 060:00 Then OFF
Thanks in advance!
Bookmarks