Results 1 to 3 of 3

Thread: AFS Setup on Apex Fusion

  1. #1
    New User
    Join Date
    Jun 2015
    Location
    Blue Springs, MO 64014 CST
    Posts
    1

    AFS Setup on Apex Fusion

    I'm trying to get my AFS setup and working correctly. Any help will be appreciated.

    If I hit the FEED A button from my APEX menu from my PC or the control panel display at the tank, the skimmer and pump turn off and the AFS works. I have learned how to do the setup on the Feeder for revolutions and time setup for when I want it to feed.

    However, when I have it set to AUTO and when it is time for it to feed, the AFS works like it should, but the skimmer and pump do not turn off.

    Here I what my advanced setup menus look like:

    AFS Feeder:
    OSC 000:00/000:30/000:30 Then ON
    If Time 00:00 to 18:39 Then OFF
    If Time 18:41 to 00:00 Then OFF
    If FeedA 000 Then ON

    Skimmer:
    1 Fallback ON
    2 Set ON
    If FeedA 000 Then OFF
    If Outlet maint = ON then OFF

    System Pump:
    Fallback ON
    Set ON
    If FeedA 000 Then OFF
    If Outlet maint = ON then OFF

    Am I even close to having this set correctly and why does it not work, but when I Hit the A feed button, skimmer and pump turn off and feeder rotates.

    Thanks,

    Rick

  2. #2
    NSI Member Krazie4Acans's Avatar
    Join Date
    Nov 2013
    Location
    US, Mountain Time
    Posts
    1,254
    How long do you want the pump to stay off after the feeder is on? How long after the pump comes on do you want the skimmer to stay off?

    It works when you select feed a because you have it coded correctly for that action. You are missing some code for having it work when the feeder runs automatically.

    Why is there a line labeled 1 and 2 in the skimmer code?

  3. #3
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    You want this, adjust the length of the time statement to match your FeedA length.

    VFeed
    Set OFF
    If Time XX:XX to YY:YY
    If FeedA 000 Then ON

    Feeder
    Set OFF
    If Outlet vFeed = ON Then ON

    Return
    Fallback ON
    Set ON
    If Outlet vFeed = ON Then OFF
    If Outlet maint = ON Then OFF

    Skimmer
    Fallback ON
    Set ON
    If Outlet Return = OFF Then OFF
    If Power Apex OFF 001 Then OFF
    If HighSw OPEN Then OFF
    Defer 002:00 Then ON

    You might be an engineer if...You have no life and can prove it mathematically.

Similar Threads

  1. Question: Apex Fusion Feeder AquaController (AFS)
    By mlieb in forum APEX Fusion
    Replies: 24
    Last Post: 08-11-2015, 16:45
  2. Help! AFS Programing in Apex Fusion
    By JosephJ in forum Misc Apex Usage & Programming
    Replies: 2
    Last Post: 04-29-2015, 16:58
  3. Help! cant setup new apex for buddy through fusion!
    By maufnjug in forum Apex Installation and Mounting
    Replies: 1
    Last Post: 12-13-2014, 17:11
  4. Bought a used apex going to setup fusion
    By jeremyd in forum APEX Fusion
    Replies: 2
    Last Post: 10-16-2014, 17:12
  5. Bought a used apex going to setup fusion
    By jeremyd in forum EnergyBars 832 / 632 / 8 / 6 / 4
    Replies: 1
    Last Post: 10-16-2014, 17:07

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •