I read the max length I can do for the 1link is 20 feet. My reservoir is 25 feet away on the same level. Is this possible?
I read the max length I can do for the 1link is 20 feet. My reservoir is 25 feet away on the same level. Is this possible?
The max head pressure for the PMUP is 20 feet. I'm going to guess you will be perfectly fine with that configuration.
The max head is actually 14'.
With that said, since it's on the same level, head pressure won't be an issue. The length is also fine since voltage drop doesn't become an issue beyond 26'. If it can't reach with two 10' extensions though, you will need to DIY an extension cable with thicker gauge wire or the PMUP might have trouble starting (or just move the 24V port closer so you can reach with two 10' extensions).
You might be an engineer if...You have no life and can prove it mathematically.
So you can connect two of the DC24’s, to make one 20’ extension?
It's not reccomended but you can. Doing so will cause a noticeable voltage drop that will lower the pumps head on startup and may damage the pump if used in high head applications. If the pump is on the same level, this shouldn't be an issue.
You might be an engineer if...You have no life and can prove it mathematically.
Oh alright, my reservoir is in the garage and my sump in the living room. Have to run under the house, at most it will have to travel upwards about a foot only..
Bookmarks