Results 1 to 6 of 6

Thread: Remote reservoir for ATK max length.

  1. #1
    Regular Vistor
    Join Date
    May 2015
    Location
    California
    Posts
    27

    Remote reservoir for ATK max length.

    I read the max length I can do for the 1link is 20 feet. My reservoir is 25 feet away on the same level. Is this possible?

  2. #2
    Frequent Visitor
    Join Date
    Sep 2013
    Location
    Rhode Island
    Posts
    146
    The max head pressure for the PMUP is 20 feet. I'm going to guess you will be perfectly fine with that configuration.

  3. #3
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    The max head is actually 14'.

    With that said, since it's on the same level, head pressure won't be an issue. The length is also fine since voltage drop doesn't become an issue beyond 26'. If it can't reach with two 10' extensions though, you will need to DIY an extension cable with thicker gauge wire or the PMUP might have trouble starting (or just move the 24V port closer so you can reach with two 10' extensions).

    You might be an engineer if...You have no life and can prove it mathematically.

  4. #4
    New User
    Join Date
    Nov 2017
    Location
    Eastern
    Posts
    2
    So you can connect two of the DC24’s, to make one 20’ extension?

  5. #5
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    Quote Originally Posted by Jakepena View Post
    So you can connect two of the DC24’s, to make one 20’ extension?
    It's not reccomended but you can. Doing so will cause a noticeable voltage drop that will lower the pumps head on startup and may damage the pump if used in high head applications. If the pump is on the same level, this shouldn't be an issue.

    You might be an engineer if...You have no life and can prove it mathematically.

  6. #6
    New User
    Join Date
    Nov 2017
    Location
    Eastern
    Posts
    2
    Oh alright, my reservoir is in the garage and my sump in the living room. Have to run under the house, at most it will have to travel upwards about a foot only..

Similar Threads

  1. Question: Aquabus Cable run max length
    By stunreefer in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 19
    Last Post: 05-12-2021, 09:56
  2. ATK with remote reservoir- Apex classic/dos
    By dmilne85 in forum Misc Apex Usage & Programming
    Replies: 9
    Last Post: 10-25-2018, 13:55
  3. ATK setup with Remote Reservoir
    By rjbenson1973 in forum Fluid Monitoring Module (FMM), FMK, ATK, LDK, and FMM Accessories
    Replies: 3
    Last Post: 09-03-2017, 18:49
  4. Max length for switch cable on BO box
    By darbronnoco in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 1
    Last Post: 02-12-2015, 08:57
  5. Question: AquaBus Cable Max Length?
    By Kyevey in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 3
    Last Post: 03-12-2014, 09:49

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •