Results 1 to 4 of 4

Thread: Mp40 programming help

  1. #1
    Frequent Visitor
    Join Date
    Feb 2017
    Location
    Central
    Posts
    51

    Mp40 programming help

    I have a peninsula tank and a two mp40s on the same side of the tank.

    I have my right MP40 set to reef Crest and my left MP40 set to tidal swell.

    I want them to switch from tidal swell to reef Crest every other day but keep the % of power I have though out the day.

  2. #2
    Frequent Contributor iamchadster's Avatar
    Join Date
    Aug 2013
    Location
    Wilsonville, Oregon
    Posts
    2,639
    You are going to need skip the programming wizard and set up vortech profiles that you will specify in each pumps outlet. First though can you be a little more specific on what you mean by switch? Do you mean you just want for example the pump on the left to switch from Reef Crest to Tidal Swell back and forth, while the pump on the right is doing the same switching but opposite of the left pump. So in summary, each pump just alternates between the two modes, but each one is running the different mode respectively. Man I'm confused now. lol..
    Chad

  3. #3
    Master Control Freak RussM's Avatar
    Join Date
    Dec 2012
    Location
    California - US Pacific
    Posts
    22,463
    It’s not possible to do that every other day.

    It would be quite easy to switch the mode at shorter intervals, such as every 12 hours. You can set that up in just a minute or two using the Vortech wizard in Apex Fusion.
    Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.

  4. #4
    Frequent Visitor
    Join Date
    Feb 2017
    Location
    Central
    Posts
    51
    Here is my current programming for Reef crest pump (right mp40) lets call this Mode A

    Fallback OFF
    tdata 02:00:00,0,0,30,2,0,0,0,0,0,0,0,0,0
    tdata 06:00:00,0,0,40,8,0,0,0,0,0,0,0,0,0
    tdata 12:00:00,0,0,45,1,0,0,0,0,0,0,0,0,0
    tdata 13:00:00,0,0,55,1,0,0,0,0,0,0,0,0,0
    tdata 15:30:00,0,0,55,1,0,0,0,0,0,0,0,0,0
    tdata 16:00:00,0,0,60,1,0,0,0,0,0,0,0,0,0
    tdata 17:00:00,0,0,60,1,0,0,0,0,0,0,0,0,0
    tdata 17:30:00,0,0,55,1,0,0,0,0,0,0,0,0,0
    tdata 20:00:00,0,0,55,1,0,0,0,0,0,0,0,0,0
    tdata 21:00:00,0,0,45,1,0,0,0,0,0,0,0,0,0
    tdata 22:00:00,0,0,40,8,0,0,0,0,0,0,0,0,0
    tdata 23:00:00,0,0,30,2,0,0,0,0,0,0,0,0,0
    If FeedA 000 Then VFeed

    Here is my current programming with the tidal (left mp40) Lets call this Mode B

    Fallback OFF
    tdata 02:00:00,0,0,30,2,0,0,0,0,0,0,0,0,0
    tdata 06:00:00,0,0,40,8,0,0,0,0,0,0,0,0,0
    tdata 12:00:00,0,0,45,7,0,0,0,0,0,0,0,0,0
    tdata 13:00:00,0,0,55,7,0,0,0,0,0,0,0,0,0
    tdata 15:30:00,0,0,55,7,0,0,0,0,0,0,0,0,0
    tdata 16:00:00,0,0,60,7,0,0,0,0,0,0,0,0,0
    tdata 17:00:00,0,0,60,7,0,0,0,0,0,0,0,0,0
    tdata 17:30:00,0,0,55,7,0,0,0,0,0,0,0,0,0
    tdata 20:00:00,0,0,55,7,0,0,0,0,0,0,0,0,0
    tdata 21:00:00,0,0,45,7,0,0,0,0,0,0,0,0,0
    tdata 22:00:00,0,0,40,8,0,0,0,0,0,0,0,0,0
    tdata 23:00:00,0,0,30,2,0,0,0,0,0,0,0,0,0
    If FeedA 000 Then VFeed


    What I'd like to do is :

    M-W-F-S
    -Right MP40 Runs Mode A
    -Left MP40 Runs Mode B

    T-Th-Sat

    -Right MP40 Runs Mode B
    -Left MP40 Runs Mode A

Similar Threads

  1. Help! MP40's Programming
    By Steveryan in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 3
    Last Post: 01-06-2019, 12:46
  2. Mp40 programming
    By jonnyedwards1981 in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 2
    Last Post: 03-11-2016, 03:42
  3. MP40 Programming Help
    By AdamJ in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 2
    Last Post: 08-18-2015, 18:24
  4. Help! Programming a new second MP40
    By Michael182 in forum Apex Programming for Vortech, Tunze, & Other Controllable Pumps
    Replies: 2
    Last Post: 12-06-2013, 05:49

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •