Ok I copied and edited a posted program from another thread ...
I have 2 A360s spaced about 22-23" apart on a 4' 85 gallon tank. Full mixed reef. Lights are mounted on arms 11.5" above the water line and water is 12.5" deep.
I'm getting good color and a fair amount of growth (with my old wizard program) but I'd like more and to be more on a fluctuating schedule. I'd also like to incorporate the LSM module with the moonlight LEDs on the moon schedule at some point in the future, if I can figure out how to mount them without cords dangling.
Here is what I've come up with so far. I set the times for intensity and color differently because I really don't want it to be full sun all day because it tends to wash out the colors and make everything brownish but I do want the intensity to be reached at a more normal rate. I've already adjusted the color spectrum down quite a bit from where it was initially, and may even do some more if the peak is too white. I've offset the sunrise by 30 minutes and the sunset by 90, just to fit into our schedule better. I may adjust this with time also.
Please let me know if you'd change anything and why.
Sent from my iPhone using Tapatalk
Bookmarks