The salinity probe on my Apex 2016 shows variable measurements changing greatly from min to min triggering alarm (< 32.5). Is that normal?
The salinity probe on my Apex 2016 shows variable measurements changing greatly from min to min triggering alarm (< 32.5). Is that normal?
If you overlay temperature with the SALT probe chart, you'll see a direct correlation between the two. Enable temperature compensation for the Salt probe by entering a starting value of 2.2 in the Temp Comp field in the SALT probe configuration. Observe for at least a full day and see if that Salt chart looks flatter/smoother.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
I entered 2.2 for temp compensation.
Thanks,
lp
Posting Permissions
Reply With Quote
Bookmarks