Has any one tried to cut off the power plug off a tunze osmolator and splice in a DC24 cord.
Has any one tried to cut off the power plug off a tunze osmolator and splice in a DC24 cord.
Won't work. The osmolator is 12V
You might be an engineer if...You have no life and can prove it mathematically.
You could look into using a voltage reducer. I did this with a DIY stir plate using 12v PC fans and it has worked out great.
Rob
Something like this should work...
[incorrect link deleted - see post below]
Oops! This is what I intended to post...
https://www.amazon.com/dp/B0756W6V4F...&pd_rd_w=H1tT8
The other device is listed as a transformer/converter, so I’m not sure what it is. They never actually specify whether the input voltage is AC or DC. Regardless, a 24 to 12V DC converter is what you need.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
There's a reasonable chance, but I don't trust anything that doesn't list detailed specs with converter topology, ripple, switching frequency, etc. An item incorrectly listed as a transformer is probably a Chinese POC that will break in a week.
You might be an engineer if...You have no life and can prove it mathematically.
Something like this is a better option.
http://www.prodctodc.com/120w-buck-c...l#.WiOd4Z9lDqA
You might be an engineer if...You have no life and can prove it mathematically.
Bookmarks