One of my eb8 switches got stuck in the on position. Is there any program code that would set OFF my alarm if a switch fails to respond? Besides using a virtual outlet which I would imagine would require one virtual outlet for every switch!
One of my eb8 switches got stuck in the on position. Is there any program code that would set OFF my alarm if a switch fails to respond? Besides using a virtual outlet which I would imagine would require one virtual outlet for every switch!
What is plugged into it?
Chad
I dont think you can. All of the watts and amps statements are internally modified to not be true when the outlet is off.
You might be an engineer if...You have no life and can prove it mathematically.
The When command will protect you against to the outlet being told to be ON for longer than a set time, which is a nice failsafe. Nothing to my knowledge will alert or protect against a hardware failure that leaves an out stuck ON.
You might be an engineer if...You have no life and can prove it mathematically.
Bookmarks