Hi Guys, I need to feed 2000 ml on Monday then 1500 ml on Tuesday and 1000 ml on Wednesday. can i do this with out having to change the DOS programming every day?
Thanks for all your help
Steve
Hi Guys, I need to feed 2000 ml on Monday then 1500 ml on Tuesday and 1000 ml on Wednesday. can i do this with out having to change the DOS programming every day?
Thanks for all your help
Steve
You can do it with virtual outlets and profiles but not with the wizard. Is it absolutely necessary that you do those exact doses on those days? It would be a lot easier programming wise to just set the wizard to 1500ml and then in the advanced tab add the line
If DOW S---TFS Then OFF
You might be an engineer if...You have no life and can prove it mathematically.
working on the virtual now. that seems the way to go. thanks for your help
I have a setup with awc in a quarantine setup. I want to be able to very the water change amounts. So I made 12 standard dos events evenly spaced throughout the day. They I used virtual outlets to control what ones turn on based on what outlet I have set for the amount. Works good but uses a lot of virtual outlets.
5 for the different volumes. These are just used manual on off.
5 that are the backend for each amount that set the times to turn on off.
One to simulate when the dos should be on.
Not sure this is the mot effective way but it seems to work.
Sent from my iPhone using Tapatalk Pro
Bookmarks