my setup is not that complicated. I have 2x WAV pumps attached to my Apex controller. I've updated to the latest firmware (5.03_9D17), but before that update and also after, I've been unable to get the pumps to act consistently. What generally happens is that I start my schedule and they act accordingly for a while, but then go from the very low GPH I've set (minimum of 1% to 8% maximum) to 100%. Needless to say, on a 90 gallon tank, this turns my aquarium into a hurricane. I have no clue why it's doing this. I tried switching to another schedule, one I found under discovery, but as with the first schedule, it would act correctly for a while, but then go to 100% GPH. Need help!
wav1.jpg
Bookmarks