I am in the process if setting up my first sump, and looking i to the different ways of making it quiet.
I am wanting to get the Cor 15 when it comes out. But was wondering if anyone has thought about using it, and a couple of flow sensors, to do a “reverse Herbie”.
My understanding of the Herbie overflow method (only from reading so far), is that you use a valve to constrain the waterflow and try to achieve a full syphon in the overflow pipe.
So i was wondering, could i put a couple of flow sensors on the overflow, and instead of restricting the overflow using a valve, crank up the cor15 and make more water flow down the pipe untill full syphon is achieved.
The theroy sounds good on paper (if that paper is a recipt for a couple of beers), but not sure if the fusion software is able to for control a cor using data from the flow sensors, or if the idea would evem work.
so i thought i would ask the question here to see if any of the cor testers have teied it.
Bookmarks